One of the slimmest water tanks available on the internet, the Ecosure 500 litre slimline water tank is quality made item with many benefits.
Rotational moulded the plastic used is of the highest quality for is purpose. The manufacturing process slowly builds a thick plastic wall that is weather and frost resistant.
Premoulding into the tank is a 1" BSP outlet which can be used to connect various ancillories such as brass garden taps and hose conntectors. This connection can also be used to connect serveral water tanks together and have each tank filling up equally.
The only item added to the tank after make it, is the 8" lid. This is normally put at the same end as the 1" BSP out. This is vented lid so as the water is drawn off the outlet, air can be sucked in through the lid. If a vented lid is not used a vacuum would form and the sides and the top of the tank would be sucked inwards.
As not everyone has the space for a water butt or if they do, its usually the part of your garden where nothing else will fit or grow. To help with this problem we have four variants of the 500 litre water tank which might help when thinking about where to install it.
Most of the tank below are self-explanitory however the difference between the V1 Water tank and the V4 Water tank is that the V4 has a second outlet 300mm above the stand outlet.
V1 Water Tank |
V2 Water Tank |
V3 Water Tank |
V4 Water Tank |
 |
 |
 |
|
| Water Tank Details |
| Height |
1010mm |
| Length |
1250mm |
| Width |
460mm |
|
| Water Tank Details |
| Height |
460mm |
| Length |
1250mm |
| Width |
1010mm |
|
| Water Tank Details |
| Height |
1250mm |
| Depth |
460mm |
| Width |
1010mm |
|
| Water Tank Details |
| Height |
1010mm |
| Length |
1250mm |
| Width |
460mm |
|
|
