MANUFACTURING UPDATE: High demand for our products has resulted in extended lead times for many of our products. We are manufacturing as fast as we can, but please call for more information if your order is urgent.

Hydroforce Submersible Water Butt PumpFast water tank delivery Fast nationwide delivery available on all our water tanks Call now Call Now 01763 261781

Home Standard water tanks Underground tanks Baffled water tanks Rainwater harvesting Insulated Open top Potable Water butts Contact us
  • Water Tanks
  • Underground Water Tanks
  • Water Butts
  • Rainwater Harvesting
  • Agricultural Storage Tanks
  • Industrial Water Tanks
  • Fish Tanks
  • Loft Tanks
  • Pipes and Fittings
  • Water Pumps
  • Water Softeners
  • Filters
  • Water Bowsers
  • UV Filters / Lights
  • Chemical Storage Tanks
  • Garden Pots and Planters
  • Cone Bottom Tanks
  • Cleaning Water Tanks
  • Water Features
  • GRP Water Tanks
  • Pallets
  • Spill Containment
  • Hydroforce Submersible Water Butt Pump


    Ref: Hydroforce

    Ex VAT
    Inc VAT

    Delivery: 7.19 inc VAT
    (5.99 ex VAT)

    Pre Product:
    Next Product: Water Butt Pump

    High Quality

    Our water tanks are manfactured to our high standard of quality.

    UK Delivery

    High demand has resulted in extended lead times for many of our products. We are manufacturing as fast as we can, but please call for more information.


    International delivery is available. Please call for details.

    The HydroForce™ Series 3 is an electronically-controlled,
    pressure-sensitive, submersible, centrifugal roto-dynamic
    pump with no reciprocating parts.
    • Pressure-sensitive (demand) pump which turns itself off until
    there is a demand for water.
    • Max head (nominal) 35 metres, pump pressure (nominal) at
    outlet 3.5 bar, max suction 3 metres.
    • Dry-run Protection: when no water is detected for 8 seconds,
    the pump is turned off by the printed circuit board (PCB)
    in order to protect the motor and pump from burning out.
    Automatic reset after a period of 30 minutes. If water is still
    not detected, subsequent reset periods are 1.5 hours, 3
    hours, 7 hours, 12 hours, 24 hours then back to the beginning
    of the cycle. Additionally, a thermal switch, not connected to
    the PCB, turns the pump off when motor overheats. It resets
    when cool which make take several hours.
    NEW: Alloy bulkhead (pictured below), pressure release gap
    and twin chamber design prevents ingress of water to motor,
    electrical components and to bearing oil.
    NEW: Double bearing seal prevents egress of bearing oil.
    NEW: Alloy bulkhead dissipates motor heat to water in
    the second chamber.
    NEW: Logic processors in PCB prevent other pump anomalies
    and permit factory programming of reset timings.
    NEW: Inlet cartridge filter, inlet strainer and output pipe
    connector are factory-fitted and the seals tested to ensure
    proper running of the pump.
    • Guaranteed for 2 years.
    • Electricity consumption 800 watts at 220-240 Volts AC 50
    Hz (requires 10 or 13 amp fuse and RCD mains socket).
    Connection cable 10m H07RN-F.
    • Inlet port to the non-removable filter 1 inch (25mm) female
    BSP. Output port 1 inch (25mm) female BSP provided with
    push-fit connector for 1 inch (25mm) MDPE pipe (11/4 inch
    (32mm) connector option by special order).
    • Dimensions L 565 W 185 H 260 mm, weight 13.1 kgs.